Outline Layer

About Outline Layers

Outline Layers are use to hold strokes or edges of filled shapes. They give a cartoon look to an animation when added to be the edge of the filled shapes. Also standalone Outlines (strokes) are used to define fold of 3D drawings and used together with shadows (created using gradients or feathering) are the basis of an artist's work.

To create an Outline Layer use the Spline Tool and check "Create Outline" in the Tool Options Panel. Once you finish the definition of the geometry of your outline and after pressing the "Make Spline" button (or selecting another tool or state) you create the Outline Layer with the current "Outline Color".

Depending on the options you choose in the Tool Options Panel other Tools like Star Tool or Circle Tool can also create Outline Layers.

Using the Layer Menu "Make Advanced Outline", "Make Outline" or "Make Region" commands you can also create those layers.

Parameters of Outline Layers

The parameters of the Outline layers are:

Name	Value	Type
Z Depth	0.000000	real
Amount	1.000000	real
Blend Method	Composite	integer
Color		color
Origin	0.000000u,0.000000u	vector
Invert		bool
Antialiasing		bool
Feather	0.000000pt	real
Type of Feather	Fast Gaussian Blur	integer
Winding Style	Non Zero	integer
Vertices	List	list (Spline)
Outline Width	2.000000pt	real
Expand	0.000000pt	real
Sharp Cusps		bool
Rounded Begin		bool
Rounded End		bool
Loopyness	1.000000	real
Homogeneous		bool

Specific parameters for Outline Layers

The first 11 parameters of the Outline are common parameter that are shared for several types of Layers. Click on the links to see their definitions. Only the particular parameters for the Outline Layer are described here.

This is a sample screen shot of an Outline Layer in action:

Outline width

The Outline width parameter is a float value in pixels that represents the basic value of the width for all the points of the curve at the same time. It works together with the width parameter of the vertices' child values. So setting the "Outline Width" to 1.0px then the resulting value for the rendered width in that vertex comes from this formula: W = OLW * VW + 2E.

Where:

• W = resulting width of the outline at that vertex.
• OLW = overall parameter for the width of all the vertices (that is the Outline Width parameter).
• VW = specific vertex width value.
• E = value of the Expand parameter.

The width handle would show the radius value for that vertex (W/2).

The width that ends up being used for each vertex is ((VertexWidth * OutLineWidth) + Expand*2):

Starting image	After doubling the value of "Outline Width"

It's possible to specify negative values for the width values, which kind of turns the vertex inside out. Here's an example where the left vertex has a negative width and the right has a positive width. Note how the edges of the spline between the vertices cross each other in the middle:

Expand

The "Expand" parameter is similar to the "Outline Width" parameter, but rather than being multiplied by each vertex's width, it is added to the radius of each vertex. In other words (2*Expand) is added to the diameter of each vertex.

The width that ends up being used for each vertex is ((VertexWidth * OutLineWidth) + Expand*2):

Zero "Expand"	Non-zero "Expand"

Sharp cups

Enabling "Sharp Cusps" makes the corners pointy when the tangents are split:

No "Sharp Cusps"	With "Sharp Cusps"

Rounded Begin

Enabling "Rounded Begin" makes the start of the outline rounded:

no "Rounded Begin"	"Rounded Begin"

Nota : With cairo render activated, if quality superior to 6, enabling "Rounded Begin" enable also R"Rounded End".

Rounded End

Enabling "Rounded End" makes the end of the outline rounded:

No "Rounded End"	With "Rounded End"

Nota : With cairo render activated, if quality superior to 6, enabling "Rounded End" enable also "Rounded Begin".

Loopyness

This parameter currently does absolutely nothing at all!

Homogeneous

Enabling 'Homogeneous' changes the way that the width of the outline changes from one spline point to the next. Each point in the spline has its own width, and the spline has its own 'Outline Width' and 'Expand' parameters which are used to give the final width at each spline point. The 'Homogeneous' parameter controls how the width is interpolated between two neighboring spline points:

• When 'Homogeneous' isn't checked, the width is interpolated linearly with the spline's 't' parameter.
• When 'Homogeneous' is checked, the width is interpolated linearly with the spline's length.

Turning off homogeneous often makes the fat end of a spline look lumpy. Maybe that's a bug:

not homogeneous	homogeneous

Misc

The Antialiasing Parameter isn't specific to the Outline layer, but it is particularly useful for the Outline layer. It makes the edges appear smoother:

not antialiased	antialiased

Note : File used File:Outline Layer.sifz