Keyframe

From Synfig Studio :: Documentation
Revision as of 14:47, 14 May 2008 by Genete (Talk | contribs) (Remove a keyframe)

Jump to: navigation, search
Languages Language: 

English • français • română


What is a keyframe?

A keyframe is a basically a "mark" in the timeline. This mark allows the user to make Synfig remember the state of the animation at that point (frame). It means that the keyframe is like a label that tell Synfig that this frame should be taken into account when creating waypoints. It also indicates that the marked frame is a special frame where the information of every parameter of every layer is stored in order to be reused later.

Each keyframe is associated with a particular frame and a frame can only have one keyframe.


What does a keyframe looks like?

A keyframe looks like a light brown vertical dashed line in the Timetrack Panel placed at the corresponding frame. You can distinguish it from the time cursor by its color (the time cursor is blue).

KeyframesLookTimeLine.png

The green dots shown in the image are waypoints.

Keyframes also appear as entries in a list in the Keyframes Panel (fix keyframe dialog to explain better the columns of the dialog)

KeyframesLookList.png

Keyframes and waypoints

A keyframe doesn't necessarily imply a waypoint, and a waypoint doesn't necessarily imply a keyframe.

A keyframe could live all the time without any waypoint but it stores the information of the values of the parameters on that specific frame. If there is a waypoint there then the waypoint information (only the parameter value) is stored too. If there is no waypoint in the keyframe then its "stored" value is the result of the surrounding waypoints, its parameter values and the interpolation values the waypoints have. This means that a keyframe remembers the values of the parameters at that frame but does not keep them static at that frame. To maintain a parameter's value static in a certain frame you must use a waypoint.

The creation of a waypoint can cause the creation of new waypoints on the neighboring keyframes depending on the current value of the Lock Keyframes state. So, maybe, the creation of a waypoint (modifying a parameter or pasting or moving a waypoint or even duplicating a keyframe) can lead to the creation of a waypoint in the the keyframes that are immediately before and after the inserted waypoint's frame. The waypoints created in the neighboring keyframes are created according to the default interpolation value in the toolbox window.

See the examples to understand how this works.

Adding, duplicating and removing keyframes

Add a keyframe

AddNewKeyframeButton.png

Place the time cursor at a frame where there isn't currently any keyframe. Then press the Add new Keyframe button. If you place the time cursor at a frame where there is currently an existing keyframe then the Add Keyframe button is disabled. Once you press the button then a new entry is added to the list of keyframes and a vertical dashed line is added in the time line. No waypoint is created.

Duplicate a keyframe

DuplicateKeyframeButton.png

Select a keyframe in the keyframe list of the Keyframes Panel and place the cursor at a frame where there isn't currently any keyframe. Then press the Duplicate Keyframe button. This would have two separated effects:

  1. If there is a waypoint at the original keyframe then the waypoint is duplicated. Its duplication includes the parameter value and its interpolation types.
  2. If there is no waypoint in the original keyframe for any particular parameter then two things could happen:
    • There is no waypoint for that parameter at ANY frame in the time line: Then NO waypoint is created.
    • If there is a waypoint in the time line for that parameter, but not in the keyframe that is going to be duplicated, then in the duplicated keyframe is created a new waypoint with a value for the parameter of the result of the current value at the original keyframe and a TCB Smooth interpolation type for both "In" and "Out".

Of course, duplicate a keyframe will produce a new keyframe at the place pointed by the time cursor and will add a new one to the keyframe list in the proper place. In the keyframe list, the new added keyframe have the same description than the original, plus a "(Duplicate)" at the end.

Remove a keyframe

RemoveKeyframeButton.png

Just select a keyframe from the keyframe list and press the Remove keyframe button. It will remove the keyframe and all the waypoints for all parameters for all layers that are currently there.

NOTE: If you move a keyframe by modifying its time in the keyframe list dialog and immediately press the Remove Keyframe button then the waypoints are not deleted. It seems to be a bug but also can be considered a feature if you really want to keep the waypoints and not the keyframe.

Editing keyframes: time, length & description

You can see in the Keyframe list dialog that there are four headers on it:

KeyframesLookList.png

  • Time
  • Length
  • Jump
  • Description

The Jump column is only a shourt cut to place the time cursor at the keyframe where you make a click in the (JMP) label.

Time

You can modify the time (frame) where the keyframe is palced just making a click in the corresponding Time cell. It will allow modify the time forward or backward the amount that you want. If you try to set the time of a certain keyframe to be the same time of another existing keyframe then the program gives you this message:

keyframe_set: Cannot change keyframe time because another keyframe already exists with that time.

Modifying the Time of a keyframe has the following effects:

  1. The existing waypoints in the keyframe will move to the new position.
  2. If any parameter have a a waypoint in the time line, then the moved keyframe will have a new waypoint set to TCB Smooth on those paramter(s).
  3. According to the default interpolation method and the Lock Keyframes status and to the parameters that have any waypoint in the time line, new waypoints will be created on the neighbouring keyframes of the destiny time (frame). The original neighbouring keyframes will be untouched if don't coincide with the destiny neighbouring keyframes.

See the example to see how that works.

Length

Change this cell doesn't seems to do nothig. Once you press INTRO you obtain the old value again. It seems to be only an informative label.

Description

This cell allow the user insert a short description of the meaning of the keyframe. Just make click on it and change the text.


Editing Keyframe Properties

KeyframePropertiesButton.png

The Keyframe Properties dialog allows change the interpolation method for all the waypoints on the keyframe at the same time. Even if, for a certain parameter, there is no waypoint on the keyframe but the parameter have other waypoints in the time line, then when you apply the Keyframe Properties you will add a waypoint at that keyframe were there aren't currently any waypoint. The added waypoints have the interpolation methods stated by the dialog. It means that the Keyframe Properties dialog will modify the interpolation methods for all the parameters that have any waypoint in the time line.


The dialog have the following parameters:

KeyframeDialog.png

  • In: Checking this value you can change the interpolation method of the left part of the waypoints of the current selected keyframe of all the layers of the canvas to the selected interpolation method in the drop down menu.
  • Out: Same but for the right part of the waypoint.
  • Tension: See TCB
  • Bias: See TCB
  • Continuity: See TCB
  • Temporal Tension: See TCB

You can check only one of both "In" or "Out" check boxes to only affect the change to the left or right part of the waypoints. The non checked part would not be modified. Same comment applies for the Manual interpolation method parameters (Tension, Bias, Continuity and Temporal Tension)

KeyframeDialog2.png

This dialog would not affect what's the interpolation method for a new waypoint created by the user, automatically created by the keyframe duplication or by the lock keyframe state. The interpolation methods for new waypoints created in those cases will be both the same (In and Out or Left and Right) and depend only on the Default interpolation method of the Tool Box window.

See the examples to understand better how it works.

Examples

Duplicate a keyframe with no waypoint on it

For example, imagine that you have following set of keyframes and waypoints and the corresponding parameter of the radius of a circle:

Before duplicate keyframe at 2s to 6s
Frame Keyframe Waypoint Radius Interpolation
0s yes yes 20.0 TCB Smooth
2s yes no 25.0 n/a
4s yes no 30.0 n/a
8s no yes 40.0 TCB Smooth

GraphBeforeDuplicate.png

notice that although the interpolation between 0s and 8s is TCB Smooth the real result 
is linear due that they are the only two waypoints of the animation for that parameter.

If you select the keyframe at 2s, place the time cursor at 6s (where there isn't a keyframe), set the default interpolation to TCB Smooth, and have the lock keyframe status to All keyframes locked and press the duplicate keyframe button, then the result is the following:

After duplicate keyframe at 2s to 6s
Frame Keyframe Waypoint Radius Interpolation
0s yes yes 20.0 TCB Smooth
2s yes no 25,78125 n/a
4s yes yes 30.0 TCB Smooth
6s yes yes 25.0 TCB Smooth
8s no yes 40.0 TCB Smooth

GraphAfterDuplicate.png

You can see that:

  1. At 0s none has changed. Not affected by the insertion of the keyframe. It is two keyframes away from 6s and also have a waypoint.
  2. At 2s there was a keyframe and stills there. But previous to the creation of the keyframe at 6s the current interpolated value of the radius was 25.0. After the creation of the keyframe at 6s the radius is the result of the interpolation between 0s and 4s frames waypoints with its radius values and its interpolation methods. That is 25.78125. This keyframe is more than one keyframe away from the new 6s keyframe so no waypoint is created.
  3. At 4s there was a keyframe and still being there. But in this case the 4s keyframe is a neighbor of the new 6s keyframe. As well as the lock keyframe state was set to All keyframes locked then the keyframe at 4s has been locked adding a waypoint on it. The radius value hasn't changed (still being 30.0) because it was locked adding a waypoint with its current value). The Interpolation mode of the waypoint was set to TCB Smooth as stated by its default value.
  4. At 6s there is a new keyframe with a new waypoint with the old value of the interpolated value of the keyframe at 2s. That is a radius of 25.0.
  5. At 8s nothing has changed. There wasn't any keyframe and there was a waypoint so nothing is expected to change.

Imagine now that you repeat the same operations but you choose the default interpolation set to Constant. Then the result is the following:

After duplicate keyframe at 2s to 6s (constant interpolation)
Frame Keyframe Waypoint Radius Interpolation
0s yes yes 20.0 TCB Smooth
2s yes no 20.0 n/a
4s yes yes 30.0 Constant
6s yes yes 25.0 TCB Smooth
8s no yes 40.0 TCB Smooth

GraphAfterDuplicateConstant.png

Now you can see that the keyframe at 2s doesn't hold the value of the parameter by itself. It only remember the value if a waypoint is created on it, by the result of the insertion of a neighbour waypoint, or if a keyframe is duplicated and the lock keyframe status affects that keyframe. In this example the value at 2s has changed drastically due to the different interpolation method for the created waypoint on 4s. If in this situation you duplicate again the keyframe at 2s to other frame (ej. 10s) then it would copy a keyframe with a waypoint on it with a radius's value of 20.0, what is the current value of the parameter in that keyframe before duplicate it.

Editing Keyframe Properties

Consider this situation for a certain layer:

BeforeChangeKeyframeProperties.png

In the sample the animation duration is 10 seconds so the image shows all the existing waypoints and keyframes. The time cursor isn't over any keyframe.

Now consider that you have the following default values:

Now select the keyframe at frame 4s in the keyframe list. Press the Keyframe Properties button and set the following interpolation method:

KeyframeProperties2.png

and press Apply button. The result will be this:

AfterChangeKeyframeProperties.png

You can see the following effects:

  1. The existing waypoints at 4s keyframe have changed its interpolation methods according to the Keyframe Properties dialog.
  2. There are new added waypoints at 4s keyframe. The waypoints are added to the paramters that have almost one waypoint in the time line (for example the one that have only a waypoint at 9s). The added waypoints at 4s keyframe have the interpolation settings that was stated by the Keyframe Properties dialog.
  3. New waypoints have been created for the neighbouring keyframes to 4s (2s and 6s) fo all the parameters that have any waypoint in the time line. The waypoints are created in the neighbouring keyframes according to the Lock Keyframes status. Also the created waypoints interpolation method responds to the default interpolation method you have set.

If in the Keyframe Properties dialog you were checked off the Out or the In check boxes then it would have happened two things:

  1. The existing waypoints at 4s would only change its interpolation method on the side the check box was checked on. The other side will be untouched.
  2. The new added waypoints will have the interpolation method set to TCB Smooth method where the check box is off and the interpolation method set by the keyframe properties dialog where the check box is on.

AfterChangeKeyframeProperties2.png

In this sample it was only checked on the "In" check box.


Change Keyframe Time

Consider again this situation for a certain layer:

BeforeChangeKeyframeProperties.png

Now consider that you have the following default values:

Now select the keyframe at frame 4s in the keyframe list. Make a click in the TIme cell and modify the time to be 3s. The result will be this:

AfterChangeKeyframeTime.png

Advanced uses of keyframes

Reusing keyframes

If you want to learn more about advanced uses of keyframes see this tutorial about reusing animations. Keyframes can be like stored "poses" that can be reused several time in the animation. Very useful for lip sync.

Reuse Animations

Usage of Onionskin

To properly use the onion skin feature (ALT-O or File>View>Toggle Onion Skin) you should consider the frame where the keyframes are set. Onion skin will show you the before and after keyframes images with a 50% opaque copy of the current view. Also the current view is 50% opaque.

See Toggle Onion Skin for more detail.


Languages Language: 

English • français • română