Difference between revisions of "Convert"

Revision as of 17:31, 6 September 2007 (view source) Dooglus (Talk | contribs) m (move converts-per-valuetype to the end) ← Older edit		Revision as of 19:10, 6 September 2007 (view source) Dooglus (Talk | contribs) m (→‎Subtract) Newer edit →
Line 166:		Line 166:
	* real "RHS"		* real "RHS"
	* real "Scalar"		* real "Scalar"
		+
		+	The "Subtract" conversion can be used with parameters of type angle, color, integer, real, and vector.
	The resulting value is:		The resulting value is:

---

Revision as of 19:10, 6 September 2007

Right-clicking on a value in the Parameters dialog brings up a context menu which has a sub-menu called "Convert". The "Convert" menu allows you to specify that the parameter should be controlled automatically in various ways. Depending on the type of the parameter the Convert menu will contain different options.

To convert the value back to its original type, select "Disconnect" from its context menu.

Convert Types

BLine

Converting a list parameter to "BLine" doesn't seem to change anything. Perhaps that's the default type for lists of vertices, such as are found in outlines and regions?

Composite

Converting a blinepoint parameter to "Composite" adds six sub-parameters:

• vector "Vertex"
• real "Width"
• real "Origin"
• bool "Split Tangents"
• vector "Tangent 1"
• vector "Tangent 2"

Converting a color parameter to "Composite" adds four real-valued sub-parameters:

• real "Red"
• real "Green"
• real "Blue"
• real "Alpha"

Converting a segment parameter to "Composite" adds four vertex sub-parameters:

• vertex "Vertex 1"
• vertex "Tangent 1"
• vertex "Vertex 2"
• vertex "Tangent 2"

Converting a vector parameter to "Composite" adds two real-valued sub-parameters:

• real "X-Axis"
• real "Y-Axis"

The resulting value is a blinepoint, color, segment, or vector made by combining the component parts.

Dynamic List

Converting a list parameter to "Dynamic List" seems to replace each of the "Vertex NNN" sub-parameters with "Item NNN" parameters which can't be expanded, but can be exported.

Gradient Rotate

Converting a gradient parameter to "Gradient Rotate" adds two sub-parameters:

• gradient "Gradient"
• real "Offset"

The resulting value is a gradient based on the "Gradient" parameter, but shifted left (for negative values) or right, according to the value of the "Offset" parameter. An offset of 1.0 will shift the gradient by its entire visible width. Values shifted off the left or right edge aren't lost - they aren't visible in the gradient as it's displayed in the parameters dialog, but they will still be used when rendering (depending on parameters such as 'Loop' and 'Zigzag', which can cause gradients to be looped between their their left and right edges, rather than using the non-displayed parts).

Linear

Converting an angle parameter to be 'Linear' adds two angle sub-parameters:

• angle "Rate"
• angle "Offset"

Converting a color parameter to be 'Linear' adds two angle sub-parameters (since svn r617):

• color "Rate"
• color "Offset"

Converting an integer parameter to be 'Linear' adds two angle sub-parameters (since svn r617):

• integer "Rate"
• integer "Offset"

Converting a real parameter to be 'Linear' adds two real-valued sub-parameters:

• real "Rate"
• real "Offset"

Converting a time parameter to be 'Linear' adds two time sub-parameters:

• time "Rate"
• time "Offset"

Converting a vector parameter to be 'Linear' adds two vector sub-parameters:

• vector "Slope"
• vector "Offset"

The parameter's value will change linearly over time, starting with the value specified by "Offset" at time zero, and increasing by the value specified by "Rate" (or "Slope", in the case of vector parameters) every second.

The resulting value for vector parameters is:

  Offset + Slope*time

and for the other 5 types of parameter it is:

  Offset + Rate*time

Radial Composite

Converting a color to "Radial Composite" adds four sub-parameters:

• real "Luma"
• real "Saturation"
• angle "Hue"
• real "Alpha"

Converting a vector to "Radial Composite" adds two sub-parameters:

• real "Radius"
• angle "Theta"

For color parameters, the resulting value is the color with the given lima, saturation, hue, and alpha amounts.

For vector parameters, the resulting value is the point reached by traveling a distance "Radius" from the origin, in the distance given by the angle "Theta".

Reference

Converting a parameter to "Reference" adds a single sub-parameter called "Link". The "Link" parameter is the same type as the parameter being converted.

It doesn't seem to do anything at all, other than adding an extra parameter. Whatever value is put into "Link" becomes the value of the parameter being converted.

The only use for this conversion type I can think of is the following:

• you know that point A should follow point B, so you export point B and connect point A to it
• you're not yet sure exactly how point B should move, so you experiment with different conversion types for point B
• changing the conversion type for point B breaks the connection you made in the first step
• converting point B to be a reference, and then experimenting with different conversions in its "Link" parameter allows point A to connect to point B and for the connection to remain in place while you experiment in the "Link" parameter

The resulting value is:

  Link

Scale

Converting a parameter to "Scale" adds two sub-parameters: one called "Link", of the same type as the parameter itself, and a real-valued parameter called "Scalar".

"Scale" can be used on angles, colors, integers, reals, and vectors.

The resulting value is:

  Link * Scalar

Segment Tangent

Converting a vector parameter to "Segment Tangent" adds two sub-parameters:

• segment "Segment"
• real "Amount"

Amount is a number between 0 and 1, defining the distance along the given segment. The resulting value for the whole parameter is the tangent to the segment, at the given point along the segment.

Segment Vertex

Converting a vector parameter to "Segment Vertex" adds two sub-parameters:

• segment "Segment"
• real "Amount"

Amount is a number between 0 and 1, defining the distance along the given segment. The resulting value is the vertex at the given point along the segment.

Sine

Converting a real-valued parameter to "Sine" adds two sub-parameters:

• angle "Angle"
• real "Amplitude".

The resulting value is:

  Amplitude * sin(Angle)

Stripes

Converting a gradient parameter to "Stripes" adds four sub-parameters:

• color "Color 1"
• color "Color 2"
• integer "Stripe Count"
• real "Width"

The resulting value is a gradient containing "Stripe Count" equally spaced, equally wide stripes of color "Color 2" with a background of "Color 1". "Width" specifies the width of the stripes, with a width of 0 or less meaning they are invisible, and a width of 1 or more meaning the whole gradient is of "Color 2".

Subtract

Converting a parameter to "Subtract" adds three real-valued sub-parameters:

• real "LHS"
• real "RHS"
• real "Scalar"

The "Subtract" conversion can be used with parameters of type angle, color, integer, real, and vector.

The resulting value is:

  (LHS - RHS) * Scalar

Timed Swap

This convert type was disabled in Synfig 0.61.06 and earlier because it didn't work.

Converting a parameter to "Timed Swap" adds four sub-parameters:

• parent "Before"
• parent "After"
• time "Swap Time"
• time "Swap Duration"

"Before" and "After" are the same type as the parameter being converted.

This conversion type linearly switches from "Before" to "After", taking "Swap Duration" seconds to do so, and completing the swap at "Swap Time".

Note that this doesn't give us anything that we can't achieve using the "Linear" conversion type and a few waypoints, except that it works on more types than the somewhat restricted "Linear" conversion. The "Linear" conversion could be extended to work on the missing types.

"Timed Swap" can be used on angles, colors, integers, reals, times, and vectors.

The resulting value is:

  if time > "Swap Time" then "After"
  else if time < ("Swap Time" - "Swap Duration") then "Before"
  else interpolate between "Before" and "After"

Two-Tone

Converting a gradient to "Two-Tone" adds two color-valued sub-parameters:

• color "Color1"
• color "Color2"

The resulting gradient has two CPoints, one at each end, starting with "Color1" and ending with "Color2".

These color parameters can be animated, giving us the ability to have the gradient change color over time. This can be used as a workaround for this bug.

Which Value Types can use which Convert Types?

There are 13 different types of value in Synfig. Each of these types has a different set of convert types available to it, as follows:

Angle

• Angle parameters can be converted to Linear, Scale, Subtract, Timed Swap, and Reference types.

BLinePoint

• BLinePoint parameters can be converted to Composite and Reference types.

Bool

• Bool parameters can only be converted to the Reference type.

Canvas

• Canvas parameters can be converted to the Reference type.

Color

• Color parameters can be converted to Composite, Linear, Radial Composite, Scale, Subtract, Timed Swap, and Reference types.

Gradient

• Gradient parameters can be converted to Gradient Rotate, Stripes, Two-Tone, and Reference types.

Integer

• Integer parameters can be converted to Linear, Scale, Subtract, Timed Swap, and Reference types.

List

• List parameters can be converted to BLine, Dynamic List, and Reference types.

Real

• Real parameters can be converted to Linear, Scale, Sine, Subtract, Timed Swap, and Reference types.

Segment

• Segment parameters can be converted to the Composite and Reference types.

String

• String parameters can be converted to the Reference type.

Time

• Time parameters can be converted to the Linear, Timed Swap, and Reference types.

Vector

• Vector parameters can be converted to Composite, Linear, Radial Composite, Scale, Segment Tangent, Segment Vertex, Subtract, Timed Swap, and Reference types.