View source for How do I.es

Esta página debería estar escrita en Español. Por favor ayúdanos a traducirla!

Hacé tus preguntas aquí, con confianza. O hazlo en  [[Wiki Wish List]].

__TOC__

== Insertar algún texto? ==

Con el desarrollo de la reciente versión, existe una herramienta de texto. Si usas la versión 0.61.08 o anterior, haz clic derecho en el lienzo y escoge Capa > Nueva capa > Otro > Texto.

== Aplicar un degradado a un objeto en lugar de todo el lienzo? ==

# Crea la región que quieres llenar con un degradé, y la capa degradé, si no lo haz hecho.
# Asegúrate que la capa degradé este arriba de la capa inicial en la [[Layers Panel|ventana de las capas]].
# Selecciona ambas capas, click derecho, y elige [[Encapsulate]].
# Despliega la nueva capa [[Paste Canvas|Inline Canvas]], y selecciona tu capa degradé.
# En la [[Params Panel|ventana de los parámetros]] selecciona el parámetro [[Blend Method]]. Luego, doble click sobre la opción Composite y se despliegará un menú. Elige [[Blend Method#Onto|Onto]].

El degradé tendrá efecto en el area visible de la región debajo de él, dentro del [[Paste Canvas|Inline Canvas]] (y en cualquier otra capa en esa sección).

== Mostrar u ocultar una capa, o desvanecer el efecto de una gradiente? ==
En el [[Panel Param]], localice la opcion [[Amount Parameter|Amount]] - esta controla que tanto del resultado de la mezcla de la capa está compuesto con la mezcla de las capas que estan debajo de la misma.

En otras palabras, para una capa cualquiera, esta se 'desvanecerá'. Para una[[Blur Layer]] cambiar a "[[Blend Method#Straight|Straight]]", esta se desvanecerá ''entre'' la versión desenfocada y la version sin desenfoque del lienzo. Si desea reducir el desenfoque, ajuste el [[Blur Layer#Size|Blur Layer's 'size' parameter]].

== Fill an outline? ==
(Requested by [[User:Karlb|Karlb]])

There are several options:
* The easiest way is to link a new region layer to the outline's shape.
*# Select the outline you want to fill.
*# In the Params Panel, right-click the Vertices parameter, select "Export", enter a name for the shape, and hit return.  This will export the shape of the outline, making it visible in the Children dialog.
*# In the Children dialog, open the ValueBase Nodes tree and select the name you just saved the shape as.
*# From the [[Layer Menu]] (either context-click on the [[Layers Panel]] or use the [[Canvas Menu Caret]]) create a new [[Region Layer]] by selecting "New Layer -> Geometry -> Region". Ensure that the created layer is selected.
*# In the parameter dialog, right-click the Vertices parameter and click "Connect".
*# Now, if you don't need exported shape, you can unexport it: right click name of the shape in the Children dialog and click "Unexport".
* Similar to the above, but using a different method:
*# Create a new region layer as above, and leave it selected.
*# Don't make any changes to the outline layer, which you want to fill! (see the Tier 5 on the [[Linking]] page for details).
*# Select both layers in the [[Layers Panel]] This will display only the parameters shared by both layers in the [[Params Panel]].
*# Context-click on the [[Vertices Parameter]], and select [[Linking|Link]].
*# The [[Region Layer]] will snap to the shape of the [[Outline Layer]].
* When you create an [[Outline Layer|outline]] with the [[Bline Tool]] that you intend to be a filled area as well, make sure you select the Fill checkbox in the [[Bline Tool#Options|tool options dialog]]. Obviously, this doesn't help much if you realise later that you needed a fill here.
* If you are using the [[draw tool]], there is a button at the bottom of the [[draw tool#Options|tool options dialog]] labeled "Fill Last Stroke", which creates a new [[Region Layer]] and links its shape to the previously drawn outline. Unfortunately, it doesn't work as of Synfig Studio v0.61.04.  It has been fixed in the current SVN version of the code.
* Create a [[Region Layer|region]] with the same number of ducks, and manually link each duck. If you want a region that depends on multiple outline layers, this is really your only choice for now.
* Use the draw tool, select only the outline to fill, draw a stroke roughly following the outline and make sure you're holding the Control key when you left go of the mouse button at the end of the stroke.  This doesn't work 100% right at the moment.

== Dock windows together? ==

*To dock (join) separate windows into one you must drag the tab ''icons'' for each of the tools into another window. 
*You can create subdivisions inside the windows by dragging the icons into the side tabs (located around the edges, the look like rectangles). 
*Tool tabs inside the window can be arranged by dragging them on top of one another, therefore changing the order.
*''How Do I min/maximize all Synfig windows on a Windows pc''? There must be an easy way/tool to do this?

== Use an external bitmap? ==

* In the image menu (>) choose file-->import. PNG with alpha channel works fine.
* To animate it without accidental stretching, right-click on the layer and choose encapsulate. You can then animate the position of the new "Inline Canvas" layer instead of the bbox.

== Use an external Vector? ==

Synfig doesn't yet support vector import because no-one has written an import process yet. You can use the Svg2synfig [[Converters|converter]], or import it as a bitmap and trace over it in synfig. If you want to implement vector import we would gladly accept your patch.

== Close a bline? ==

* Right click on the starting point and then click on loop bline.

Note: It doesn't work unless the initial point has a tangent - ie the first segment is curved. But you can hide tangent ducks (Alt+3, or "Caret Menu > View > Show/Hide Ducks > Show tangent ducks") and process as described. Don't forget to press (Alt+3) after that to show tangent ducks again.

== How do I transform encapsulated objects? ==

* Right click on the Encapsulated object in the Layer dialog and choose "select all child layers". Then you select the ducks you want to transform (usually just all of them, like for rotating the object), and the rotate or scale tool and do the work.

== Make objects go behind each other, without moving layers? ==

You'll notice each layer you make has a number in the z depth column in the Layers Panel. Say you have 3 layers, they will be numbered 2 (lowest, e.g. a square) 1 (eg a circle) 0 (highest, the default, e.g. a line). In order to make layer 1, the circle, pass behind layer 2, the square, change its z depth to be 3 or more. The z depth of the circle needs to be greater than 2 in order to be behind the square. To make the square on top of everything, you'd change its z depth to -1 or less. 

Positive numbers on the z axis go into the screen, and negative numbers go out of the screen, towards the viewer.  

It is possible to animate this effect, but each layer is discrete. They seem to go from 0 to 0.9999.

In addition, objects in encapsulated layers can only go behind other objects in the same encapsulated layer. However an encapsulated layer can go behind another encapsulated layer.

== Copy a complex convert combination between parameters of different layers? ==

For example: you want to copy a complicated [[Convert|conversion]] type that you have in one parameter from a layer, to other parameter (maybe not a root parameter, but a sub-parameter) of other layer. If you [[Export|export]] the complicated conversion type from the original layer and then go to the other layer and select [[Connect]] (right click and the exported and the parameter both selected) then you have the parameter form the second layer to be exactly the same than the original one. But there is a drawback: if you modify one of the sub-parameters in the complicated conversion type (e.g. you change the value of one of them) then automatically the same sub-parameter of the other layer is changed.

How can you copy the conversion but allow modify the sub-parameters independently on each layer? 

Once you have achieved the complex conversion type in the original layer, <u>don't export the root parameter!</u> If you have done yet [[Export|unexport]] it. (Why?. You will understand it later.) Now duplicate the original layer. Then you should obtain the same layer with the same conversion type placed at the same parameter (but not exported). NOW export the parameter from the duplicated layer. Then go to the (sub) parameter of the layer where you want to copy the complex conversion type and Connect it to the just exported parameter form the duplicated layer. Now delete the duplicated layer (!). Then the exported [[ValueNode]] still undeleted and the layer where you wanted to copy the complex convert type have a (sub) parameter connected to it. You can [[Export|unexport]] the ValueNode or not. It is up to you. But notice that the conversion type is already copied into other (sub) parameter of other layer and they are independent as well as you can change one of them (by modifying the sub-parameters) and the other remains untouched.

== Make an existing animation run at half speed? ==

If you have an animation that runs from 0s to 10s and you want it to run at half speed from 0s to 20s, how can you do that?

* Either: encapsulate it, and use the 'time offset' parameter in the encapsulation layer to slow it down:
** Right-click 'time offset' in the encapsulation layer, convert>linear, rate -0.5 offset 0.  That means offset the time by -0.5 seconds per second - or in other words, run at half speed
** Or, putting waypoints on the 'time offset' param would work too: 0 at 0s and -10 at 20s.  (The choice between using a linear convert and valuenodes is entirely up to you.  They both achieve the same result in this simple case).

* Or: use a [[Time Loop Layer]].  The first method seems better and more intuitive in this case, but there are ways of getting the same effect from the Time Loop layer.  Perhaps the Time Loop layer is better if the animation doesn't run from 0s, but from some other time.  Anyway: put a Time Loop layer over the layers you wish to slow down, and:
** Either: set duration to 0, local time to 0, convert->linear the link time and set rate to 0.5 - this slows the animation down *to* 50% of its original speed;  use bigger rates to slow it down less
** Or: set duration to 1h (*), link time to 0, convert->linear the local time and set rate to 0.5 - this slows the animation down *by* 50%; use bigger rates to slow it down more
(*) if your animation is longer than 1h then set this parameter to EOT (End Of Time) what is the same as Infinite (INF) for a real number but for a time parameter.

== Draw a rectangle with a given width and height? ==

I was asked on IRC how to specify the width and height of a rectangle, rather than having to specify the position of two opposite corners.  Here's how:

* draw a rectangle
* go to the [[Params Panel]]
* right-click the 'point 1' parameter and [[Export]]
* give it a name, "p1" say
* right-click the 'point 2' parameter and [[Convert]] to [[Convert#Add|Add]]
* (that's saying that rather than specifying the absolute position of the other point, you want synfig to calculate it for you)
* (it will make 2 new sub-parameters for 'point 2', and the value used for point 2 will be their sum so we want to tell it to use 'point 1' and your (width,height))
* open up the sub-parameters of 'point 2' by clicking the triangle to its left
* go to the [[Children Panel]], open up the values and select the one you exported earlier (p1)
* right-click the "LHS" parameter in the parameters dialog and [[Connect]] it
* then enter the width and height you want in the 'RHS' parameter

== Make linked BLine vertices not affected by Rotate layer? ==
Mira http://dooglus.rincevent.net/synfig/logs/2008/%23synfig-2008-02-07.log 
Vea también: [[Convert]].

== Create dashed outlines? ==

If you want to make simple dashed outlines the faster way is proceed like this:

* Create a Curve Gradient and an Outline over the same [[Bline]] using the [[Bline Tool]] options. Check both Outline and Gradient at the [[Tool Options Panel]].
* Raise up the gradient layer (it is created below the [[Outline Layer]]).
* Modify the gradient [[Blend Method]] parameter to be Straight Onto. That would render the gradient onto the outline width. Also it wouldn't render the outline, so transparent portions of the gradient are transparent.
* Check the 'Perpendicular' parameter of the Curve Gradient Layer.
* [[Convert]] the Gradient Parameter of the Curve Gradient Layer to be one of those types: Stripes or Repeat Gradient.
* Modify the properties of the sub parameters to achieve the desired effect.

== Render to AVI with higher quality? ==

=== Using raw video ===
The module used by Synfig to render AVI files is ffmpeg. For the moment there is not interface to control ffmpeg options so you render with a fixed bitrate and quality. If you want the maximum quality in your AVI file, follow these steps:

* Render your animation to yuv420p format. To do that select that target at the drop down list of the render dialog and add the ".yuv" extension to your animation name (without quotes).
* Once rendered (it would produce a huge size yuv file) you can quickly convert it to AVI using this command:

 ffmpeg -i animation.yuv -sameq animation.avi

Change the animation file name to your one.


=== Rendering trough png sequence. ===
Render your sif to png sequence 
 mkdir render
 synfig my_animation.sifz -o render/frame.png
Then convert it to movie with ffmpeg
 ffmpeg -r <frame rate> -i render/frame.%04d.png <more settings from ffmpeg's manual> my_animation.mov
If you need nice open source format without any tweaks you may try ffmpeg2theora:
 ffmpeg2theora render/frame.%04d.png --inputfps <frame rate> -o my_animation.ogg
png takes less disk space then yuv.
--[[User:AkhIL|AkhIL]] 21:38, 9 April 2008 (EDT)

==Increase performance by optimizing during compilation time? ==

I would like to know what parameters do I need to apply to configure to improve performance. [[User:Genete|Genete]] 11:04, 9 April 2008 (EDT)

To optimize program you should set two environment variables
 export CFLAGS=""
 export CXXFLAGS=$CFLAGS

First flag will be "-O3" (ow three). "-02" is normal optimization. "-03" is hard optimisation.

Now you should get info about your CPU
 cat /proc/cpuinfo

find your cpu model name

now go to man gcc and searc "-mtune"

find your cpu and add "-mtune=your-cpu -march=your-cpu" to CFLAGS. 

Then look at flags from /proc/cpuinfo and search it in gcc manual
For example I have 3dnow. So I can find "-m3dnow". For sse I can find "-msse" and "-mfpmath=sse" (can make program unstable). 

Finaly you may add "-ffast-math" to disable math checks. But it can make program unstable.

For my AthlonXP I'm using this flags:
 export CFLAGS="-O3 -pipe -mtune=athlon-xp -march=athlon-xp -mmmx -msse -m3dnow -mfpmath=sse -ffast-math -funsigned-char -fno-strict-aliasing"
 export CXXFLAGS=$CFLAGS
--[[User:AkhIL|AkhIL]] 12:05, 9 April 2008 (EDT)